Detailed Product Description

Drywall framing is not designed to

bear vertical or horizontal loads,

but will produce a very strong wall

when the studs are faced with

drywall panels on both sides. Clark

Western studs are roll formed and

made with punch holes so that

they are ready for plumbing lines

and electrical and data wiring.

Drywall framing is also easier to

work with than wood. Track is

attached to the ceiling and directly

below on the floor in the planned

wall position. Then the studs are

cut to the desired length using

metal snips (this allows for

variations in floor-to-ceiling height)

and inserted and twisted into

place as required by stud spacing

guidelines. Stud and track are then

screw attached and panels are

applied.

(1) Gypsum board

(2) Felt strips

(3) Track

      flange 25mm, 28mm or 30mm

      width 51mm, 65mm, 70mm, 75mm or 94mm

      thickness 0.5mm, 0.55mm, 0.6mm, 0.65mm or 0.7mm

      standard length 3000mm

      made of galvanized steel.

(4) Stud

      flange 36mm

      width 50mm, 64mm, 68mm, 73mm or 93mm

      thickness 0.5mm, 0.55mm, 0.6mm, 0.65mm or 0.7mm

      standard length 3000mm

      made of galvanized steel

(5) Board protection channel

(6) Insulating material

(7) Corner bead angle

      30 x 30 mm, standard length 3000mm

      made of galvanized steel.

The thickness and length can be provided in accordance with customers' requests